Hallmark Engineers is known as a leading manufacturer of DOUBLE CONE BLENDER in Mumbai.The double cone blender has two sections that are shaped like cones and slope at 45 degrees. The wide ends of the cone section are joined to a center band by welding. The blender can tumble side to side because it is mounted between two trunnions. Material is loaded to a fill level between 50% and 60% of the blender's capacity during operation. The material in the vessel spreads out as the blender tumbles. The material folds over itself rather than siding along the inner wall because of the transition area at the band between the cones. This results in gentle mixing with only very slight shear. Attrition-degrading powders and granules are ideal for the blender. Because there are no areas where particles can be trapped and batches can be cross-contaminated, the vessel's smooth transition area also makes cleaning easier. For critical mixing applications, contrast rotary baffles with mechanical seals on both ends are available. We are the DOUBLE CONE BLENDER Manufacturers in Mumbai.
- Stainless steel is used for all equipment components, including the mixing tank and blades.
- The apparatus consists of two cones joined together to form a cylinder that is rotated about a shaft axis. We are the DOUBLE CONE BLENDER Manufacturers in Mumbai.
- The conical shape at both ends makes mixing uniform and easy.
- The materials to be mixed are introduced to the mixer through one of the ports.
- To facilitate the tumbling of the powders, approximately two thirds of the volume of the mixer is loaded. We are the DOUBLE CONE BLENDER Manufacturers in Mumbai.
- When the mixer is started, it rotates along the axis.
- Mixing is caused by the tumbling motion during rotations.
- The speed of the mixer plays an important role in the mixing
- a. If rotations are slow: Mixing will not take place as materials will just glide over one another. We are the DOUBLE CONE BLENDER Manufacturers in Mumbai.
- b. Because of the generation of centrifugal forces by rapid rotation, powders will remain adhered to the walls and there will be no mixing.
- c. The double cone blender must be run at maximum speed for best results.
- Easy to maintain and clean.
- There is no possibility of material clogging into comers. We are the DOUBLE CONE BLENDER Manufacturers in Mumbai.
- A large amount can be handled easily.
- It is efficient for mixing powders of different densities.
- Wear on equipment is little.
- Not suitable for fine particles
- Not suitable for particles with greater particle size difference due to less shear
- The Double Cone Blender is a useful piece of equipment that can be used to mix dry powders and granules in a uniform manner. Mixing dry powder for capsule and tablet formulations.
- The Double Cone Blender can be used to mix chemicals, cosmetics, pharmaceuticals, and food, among other things.
